![\"\"](\"http:\/\/150.230.25.222\/wp-content\/uploads\/2024\/11\/CNC-Turning-768x512.jpeg\")
\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\tCNC Turning<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\tCNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as it rotates. Here are the typical steps involved in CNC turning:<\/p>
1. Prepare the Workpiece<\/strong><\/h3>- Select the raw material for the part, usually a round bar or other shape suitable for turning.<\/li>
- Cut the material to a manageable length if necessary.<\/li>
- Ensure the material is securely mounted in the CNC lathe’s chuck.<\/li><\/ul>
2. Set Up the CNC Lathe<\/strong><\/h3>- Install and secure the appropriate cutting tools in the tool turret or holder, based on the required operations (e.g., roughing, finishing, threading).<\/li>
- Calibrate the tools by setting tool offsets in the machine to ensure precise tool positioning.<\/li>
- Adjust the machine settings (spindle speed, feed rate, depth of cut) according to the material and desired finish.<\/li><\/ul>
3. Create or Load the CNC Program<\/strong><\/h3>- Program the machine using G-code, which includes instructions on tool movements, spindle speed, feed rate, and other parameters.<\/li>
- Load the CNC program if it\u2019s pre-written or created in CAM software based on the design’s CAD model.<\/li>
- Double-check the code for accuracy to prevent tool collisions or other errors.<\/li><\/ul>
4. Run a Dry Run (Optional)<\/strong><\/h3>- Perform a “dry run” without material (or at a very low speed) to simulate the toolpath and verify that the tool movements align with the desired part geometry.<\/li>
- Make adjustments to the program if necessary.<\/li><\/ul>
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t![\"\"](\"http:\/\/150.230.25.222\/wp-content\/uploads\/2024\/11\/end.jpeg\")
\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as it rotates. Here are the typical steps involved in CNC turning:<\/p>
1. Prepare the Workpiece<\/strong><\/h3>- Select the raw material for the part, usually a round bar or other shape suitable for turning.<\/li>
- Cut the material to a manageable length if necessary.<\/li>
- Ensure the material is securely mounted in the CNC lathe’s chuck.<\/li><\/ul>
2. Set Up the CNC Lathe<\/strong><\/h3>- Install and secure the appropriate cutting tools in the tool turret or holder, based on the required operations (e.g., roughing, finishing, threading).<\/li>
- Calibrate the tools by setting tool offsets in the machine to ensure precise tool positioning.<\/li>
- Adjust the machine settings (spindle speed, feed rate, depth of cut) according to the material and desired finish.<\/li><\/ul>
3. Create or Load the CNC Program<\/strong><\/h3>- Program the machine using G-code, which includes instructions on tool movements, spindle speed, feed rate, and other parameters.<\/li>
- Load the CNC program if it\u2019s pre-written or created in CAM software based on the design’s CAD model.<\/li>
- Double-check the code for accuracy to prevent tool collisions or other errors.<\/li><\/ul>
4. Run a Dry Run (Optional)<\/strong><\/h3>- Perform a “dry run” without material (or at a very low speed) to simulate the toolpath and verify that the tool movements align with the desired part geometry.<\/li>
- Make adjustments to the program if necessary.<\/li><\/ul>
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
2. Set Up the CNC Lathe<\/strong><\/h3>- Install and secure the appropriate cutting tools in the tool turret or holder, based on the required operations (e.g., roughing, finishing, threading).<\/li>
- Calibrate the tools by setting tool offsets in the machine to ensure precise tool positioning.<\/li>
- Adjust the machine settings (spindle speed, feed rate, depth of cut) according to the material and desired finish.<\/li><\/ul>
3. Create or Load the CNC Program<\/strong><\/h3>- Program the machine using G-code, which includes instructions on tool movements, spindle speed, feed rate, and other parameters.<\/li>
- Load the CNC program if it\u2019s pre-written or created in CAM software based on the design’s CAD model.<\/li>
- Double-check the code for accuracy to prevent tool collisions or other errors.<\/li><\/ul>
4. Run a Dry Run (Optional)<\/strong><\/h3>- Perform a “dry run” without material (or at a very low speed) to simulate the toolpath and verify that the tool movements align with the desired part geometry.<\/li>
- Make adjustments to the program if necessary.<\/li><\/ul>
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
3. Create or Load the CNC Program<\/strong><\/h3>- Program the machine using G-code, which includes instructions on tool movements, spindle speed, feed rate, and other parameters.<\/li>
- Load the CNC program if it\u2019s pre-written or created in CAM software based on the design’s CAD model.<\/li>
- Double-check the code for accuracy to prevent tool collisions or other errors.<\/li><\/ul>
4. Run a Dry Run (Optional)<\/strong><\/h3>- Perform a “dry run” without material (or at a very low speed) to simulate the toolpath and verify that the tool movements align with the desired part geometry.<\/li>
- Make adjustments to the program if necessary.<\/li><\/ul>
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
4. Run a Dry Run (Optional)<\/strong><\/h3>- Perform a “dry run” without material (or at a very low speed) to simulate the toolpath and verify that the tool movements align with the desired part geometry.<\/li>
- Make adjustments to the program if necessary.<\/li><\/ul>
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
5. Start the Machining Process<\/strong><\/h3>- Initiate the turning operation by starting the spindle, which rotates the workpiece.<\/li>
- The cutting tools move along the programmed paths, gradually removing material to shape the workpiece.<\/li>
- Common operations include:
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- Facing<\/strong>: Flattening the face of the workpiece.<\/li>
- Turning<\/strong>: Shaping the outer diameter.<\/li>
- Boring<\/strong>: Enlarging an existing hole.<\/li>
- Threading<\/strong>: Cutting threads.<\/li>
- Grooving<\/strong>: Creating recesses.<\/li><\/ul><\/li><\/ul>
6. Monitor the Process<\/strong><\/h3>
- Watch for tool wear, unusual vibrations, or temperature changes during machining.<\/li>
- Adjust coolant flow if necessary to reduce heat and improve tool life.<\/li>
- Make minor adjustments as needed to maintain dimensional accuracy.<\/li><\/ul>
7. Finish and Inspect the Part<\/strong><\/h3>
- Complete the turning operations and remove the finished part from the chuck.<\/li>
- Inspect the part\u2019s dimensions, surface finish, and other features to ensure it meets specifications.<\/li>
- Perform any additional post-processing, such as deburring or polishing, if needed.<\/li><\/ul>
8. Clean Up and Document<\/strong><\/h3>
- Clean the machine and remove any swarf (metal chips) generated during turning.<\/li>
- Record relevant data, like cycle time, tooling used, and machine settings, for future reference or repeatability.<\/li><\/ul>
Each step requires precision to ensure high-quality, accurate parts are produced. CNC turning can be further optimized by selecting the right tools, speeds, and feeds based on the material and part requirements.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"CNC Turning CNC turning is a machining process used to produce cylindrical parts by removing material from a workpiece as […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","om_disable_all_campaigns":false,"site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-121","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=121"}],"version-history":[{"count":11,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions"}],"predecessor-version":[{"id":597,"href":"http:\/\/150.230.25.222\/index.php?rest_route=\/wp\/v2\/pages\/121\/revisions\/597"}],"wp:attachment":[{"href":"http:\/\/150.230.25.222\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- Turning<\/strong>: Shaping the outer diameter.<\/li>